SKU: UC IR | UPC: 819730013804
Universal infrared remote control for a variety of ADJ lighting fixtures.
Advantage Points: 15

Where to Buy

Enter your zip code below to find this product at a retailer near you!

Product Description


The UC IR infrared remote gives you control of various functions to a variety of ADJ fixtures with “IR” capabilities. To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away.



• STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the initial state.

• FULL ON - Hold this button down to fully light up the unit. When you let the button go, the unit will return to its previous state.

• FADE/GOBO - Control fade or GOBO (depending on the fixture)

• “DIMMER +” and “DIMMER -” - Use the buttons to adjust the output intensity. 

• STROBE - Press and hold this button for strobing.

• COLOR - Press this button to activate color mode. Use buttons 1-5 to select your desired color.

• 1- 9 BUTTONS - Use buttons 1-9 to select your desired color when color mode is active or your desired show when show mode is active.

• SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.

• SHOW 0 - Press this button to select Show 0. Use buttons 1-9 to select Shows 1-9. Press the Show 0 button twice to run Show 10, and press button 1 twice to run show 11.



Battery Specifications

  • Battery Type: Lithium Battery (CR2025)
  • Battery Energy: 0.45WH (Watt Hours)
  • Battery Weight: 2.5g
  • Battery Voltage: 3V
  • Battery Capacity: 150mAh
  • Total Lithium Ion Cells: 1pc



There are currently no videos available for this product.



There are currently no downloads available for this product.:


Frequently Asked Questions

Please see our frequently asked questions below. Please feel free to send us your questions by clicking here.

I have a 4 Inno Pocket Scans, and 4 Inno Pocket Rolls, will 1 remote control them all or do I need a remote for each master fixture?

Once remote is only needed if you program the first unit to be the master.

Dear, is there any remote control that I can use with American DJ Stinger 3-in-1 DMX LED Effect Light. Thanks, Marc

Hello Marc,

Unfortunately, there are no hand-held controllers that will work with the Stinger at the moment. If you want to control this light you would need to use one of our intellegent dmx controllers. Here are a few models below. Let me know if you have any further questions. http://www.adj.com/dmx-operator http://www.adj.com/sdc12


Is the UC IR compatible with the American DJ Dotz TPar System


Thank you for reaching out to us. Unfortunately, the uc ir remote will not work with the dotz tpar system. The correct controller for that system is called the dotz par rf controller. I will attach the link below for the controller. Let me know if you have any further questions. http://www.adj.com/dotz-par-rf


which remote works with the pinpoint gobo? there seems to be a few remotes you guys sell thank you

Hello Mike,

Thank you for reaching out to us. We have two controls that will work with this light. We have the ADJ UC IR Remote Control & ADJ LED RC3 Control. With the UC IR you can control the light with your Iphone or with your Ipad. You just have to download the free airstream app on your ios device. The ADJ LED RC3 is a hand held controller that allows you to change colors with in the light as well. let me know if you have any further questions.