Inno Color Beam Z7

SKU: INN777 | UPC: 819730010896
Get smooth, strong lighting effects with the ADJ Inno Color Beam Z7. Featuring 7x 10W RGBW Quad Color Osram LEDS, fast pan tilt movement, plus motorized zoom with variable beam angle from 10-60 degrees. Three operational modes and 5 dimmer curve modes make it the ultimate in versatility.
Advantage Points: 1000

Where to Buy

Enter your zip code below to find this product at a retailer near you!

Product Description


Built from high quality components, the ADJ Inno Color Beam Z7 is a compact LED powered moving head beam fixture that features a professional motorized zoom offering a variable beam angle from 10 to 60 degrees. Adding this unit to your lighting show repertoire will bring your entire light show will add pure lighting excitement to any event from nightclubs, stage productions, churches and mobile productions. 

The Inno Color Beam Z7 is powered by 7x 10W RGBW (4-IN-1) Quad color Osram LEDs. The 64 Built-in color macros gives a variety of pre-set colors available instantly.  The 540-degree pan and 220-degree tilt allow for a maximum beam coverage across the venue.

This unit my be positioned on the floor or mounted, or to truss or the ceiling using the supplied Omega bracket. The electronic strobe/pulse effect will allow for random strobe effects that range in speed allowing for a spectacular display of flashing lights. With the daisy-chain capability, the Inno Color Beam Z7 maybe be powered linked for quicker set-up and connectivity.

Compatible with the American DJ UC3 easy-to-use controller (sold separately). The ADJ Inno Color Beam Z7 will give your next event the pure lighting excitement it needs to take it to the next level of professional light shows.



  • High Output LED Moving Head Wash with motorized zoom
  • Motorized Zoom: 10 ~ 60-degree beam angle
  • 3 Operational Modes: Sound Active, DMX Controlled or Show Mode
  • 14 DMX channels
  • 64 Built-In Color Macros
  • 4 Built-In light shows
  • Electronic Dimming: 0% - 100%
  • Five Dimmer Curve Modes
  • Pan/Tilt Inverse Mode for contrasting movement when fixtures are linked together
  • Fast Pan Tilt Movement
  • Pan: 540-degree; Tilt: 220-degree
  • 16-Bit Fine Pan/Tilt control
  • 4-Button DMX LCD menu
  • Stepper motors with micro stepping
  • Includes Omega bracket for truss mounting
  • 3-pin XLR In/Out
  • Fan cooled
  • Electronic Strobe/Pulse effect; random strobe slow to fast
  • Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
  • IEC AC IN/OUT on rear to daisy chain power 
  • (up to 4 Inno Color Beam Z7’s @ 120V and 8 Inno Color Beam Z7’s @ 230V ) 
  • PWM (Pulse Width Modulation): 1K
  • Strobe Rate: 1-19HZ
  • Light Source: 7x 10W RGBW Quad Color (4-IN-1) Osram LEDs
  • Light Output: 12700 LUX @2M; 3200 LUX @4M (10-degree), 980 LUX @2M; 265 LUX @4M (60-degree beam), 1240 LUX @4M (13 degree beam)
  • Long Life LED (Rated at approximately 50,000 hrs)
  • Power Cable Length: 1.5M (IEC)
  • Multi-voltage Operation: 100-230V, 50Hz/60Hz 
  • Power Consumption: 104W
  • Dimensions(LxWxH): 10.5” x 6.75” x 13.5”/ 262 x 167 x 340mm
  • Weight: 17 lbs./7.5 kg.
  • ETL Approved





The following downloads are available for this product:

Title Description
Inno Color Beam Z7 Cut Sheet Download
Inno Color Beam Z7 Photometrics Download
Inno Color Beam Z7 User Manual Download


Frequently Asked Questions

Please see our frequently asked questions below. Please feel free to send us your questions by clicking here.

I am trying to find a Flight case for the Z7. I currently have 4 and am looking at least 2 more.

Ken, We don't do flight cases for this product , but Odyssey Gear, Pelikan and Gator make cases you may be able to modify for use.

Do the Inno color beam Z7's come with the power jumper cable to go from fixture to fixture We ordered 3 of them and they are on their way I just need to know if those cables are in there. If not do you sell them and where can I find them to order if we have to.

The jumber cables do not come with the Zfixtures as there are 4 sizes to choose from.3' to 15' and we can't tell which one you will need. You can purchase these cables from the same dealer you purchased your lights from. They are ECCOM-3,ECCOM-6,ECCOM-10, AND ECCOM-15.

Does it support color temperature?

Hello Savion,

Thank you for reaching out to us. Yes, while mixing colors you can get diffrent color temperatures. Let me know if you have any further questions.