Fog Fury Faze
UPC#: 819730012654
Advantage Points: 250
Redemption Points: 5000
SKU
FOG602
The ADJ Fog Fury Faze is a lower cost alternative to an oil-based Haze Machine, that actually uses water-based fog juice. It creates an even mist right out of the machine rather than a big burst of cloudy fog. The Fog Fury Faze uses standard water-based fog liquid, has a warm-up time of 5 minutes, has a 2 liter external fog liquid tank, and has an output of 1,000 cubic feet per minute.
- 700W portable, high output Faze Machine
- High performance pump for optimum output
- ADJ’s Electronic Thermo Sensing (ETS) technology
- Automatic circuit cut-off to protect pump if fog fluid tank runs dry
- Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
- LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
- Convenient carrying handle
- Low Fluid Indicator on rear
- Warm-up time: 5 min
- External fog fluid tank: 2 Liter
- Warm-Up Time: 5 Minutes
- Fog Output: 1,000 (cu.ft/min)
- Fluid Consumption: 9 ml/min
- Uses water-based fog fluid
- Included Accessory: ADJ FF23TC - 25 ft wired timer remote
- Power Connection: IEC AC In
- Heater: 650W
- Voltage: AC 120V, 230 or 240 50/60Hz
- Power Consumption: 700W (Full on)
- Dimensions (LxWxH): 15” x 10” x 8.5” / 376 x 250 x 212mm
- Weight: 14 lbs. / 6.2 kg.
Videos
Downloads
The following downloads are available for this product:
| Title | Description | |
|---|---|---|
| Fog Fury Faze User Manual | User Manual | Download |
The ADJ Fog Fury Faze is a lower cost alternative to an oil-based Haze Machine, that actually uses water-based fog juice. It creates an even mist right out of the machine rather than a big burst of cloudy fog. This allows for a more even fog atmosphere in the air to highly beams of light from lighting effects.
It features ADJ’s advances in Fog Machine technology such as: a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging, a high performance pump system for optimum output, plus ADJ’s Electronic Thermo Sensing (ETS) technology for heating optimization.
The Fog Fury Faze uses standard water-based fog liquid, has a warm-up time of 5 minutes, has a 2 liter external fog liquid tank, and has an output of 1,000 cubic feet per minute.
It features ADJ’s advances in Fog Machine technology such as: a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging, a high performance pump system for optimum output, plus ADJ’s Electronic Thermo Sensing (ETS) technology for heating optimization.
The Fog Fury Faze uses standard water-based fog liquid, has a warm-up time of 5 minutes, has a 2 liter external fog liquid tank, and has an output of 1,000 cubic feet per minute.
Write Your Own Review
Customer Questions