Why does the spec on http://www.americandj.eu/en/dotz-tpar-system.html say 3,6,7,12 and 18 channel options whereas http://www.adj.com/dotz-tpar-system says 3,5,9,12 & 18, please?
I have no idea. We are AMERIVAN DJ USA and our dotz T bar System is 3,5,9,12 and 18. It may be an error or that product is different for Eurepean needs.
Hello. I have two Dotz Par System. And dmx mode suddenly stop working. I have checked all cables and they are fine. Other lights are working. I have a problem only with Dotz Par System. It was working but during last party Dotz Par stopped working.
Please contact firstname.lastname@example.org
I've broken a filter screw on one of the lights...... do you have additional screws for sale....i have been unable to find them on your site.
Please call 323-582-2650 and speak to service to locate the parts you need.
how do i dim the lights on a Dotz TPar System.. do i need Dmx to do that ?
The unit comes with everything you need to controll the unit, including the dimming function.
How do you dim this fixture without dmx? What is the procedure on the menu?
You can only dim each color individually. If you want to dim down all colors at the same time then you will need a dmx controller. Let me know if you have any further questions.
On the Dotz TPar System can the two additional lights plugged into the top be controlled by the pedalboard and/or the remote. I have two of your Jelly Par Profile units. Thanks, Sid
Unfortunately, you will only be able to power on your additional jelly par profiles with the pedalboard and that's pretty much it. If you looking on controlling them you will either need the handheld remote for the jelly pars or a dmx controller. Let me know if you have any further questions.
Will the ADJ RGBW4C IR controller work with the Dots TPar system?
Yes, that controller will work with the dotz t par system. But the RGB 3C IR will be more appropriate controller since the dotz system can only go into 3 channel mode and not in the 4 channel mode. Let me know if you have any further questions.
When using a Dotz TPar System with foot controller or RF remote, can I connect a second Dotz TPar fixture via DMX as a slave? So I can control two fixtures with one foot controller or one RF remote.
Yes, you will be able to master and slave both systems with one foot controller. Let me know if you have any further questions.