Need to know which remote controller model is compatible with my adj mega go flood par and bar
Hello Eduardo. The Mega Par Bar and Par both use the ADJ RFC.
I bought a adj led rc2 remote to use with a mega tripar profile. It doesn't seem to work. I set the mode to d.on and setup to LR.on. do I have the wrong remote? BTW: it came with zero instructions.
Well the Mega TRipar Profile is a 3 color device and the remote you have is designed for 4 colors.
The proper remote is the ADJ LED RC or the ELAR WR from Elation.
Is the ADJ LED RC2 remote compatible with the ADJ MEGA FLAT PAK lighting?
ADJ LED RC2 is a 4 channel controller and the mega flat pak is 3 channels so the ADJ LED RC is the correct controller not the 2.
Just received the LED RC2 through Pro Audio & Lighting in Warren, MI. Can you forward me the Owners Manual for this product please. Thanks
The instructions of operation are in the owners manual of any of the FLAT PAR 4 color units like the QWH or QWA product. Go to www.adj.com, look up flat par qwh5 and open the download section and download the owners manual. On page 12 you will see ADJ LED RC OPERATION. This tells you how the remote works.
Does the RC2 remote work with the Ultra Hex Par3 fixture? I have the light and the remote and have followed the instructions per page 10 of my manual. Still no luck. Please advise.
Sorry but no, as the RC2 is inferred and the Ultra hex Par 3 requires the RFR044 remote which is radio frequency not IR.
Does the RC2 work to control the Mega-Bar-RGBA?
No, you will need the ADJ RFC as it is a radio frequency unit not an Infra Red unit. RFR044.
I am getting ready to order the new mega flat pat plus 4. I was inquiring about what remote control do I use for this item.
The appropriate remote control is the ADJ LED RC2.
Is the ADJ LED RC2 compatible with the American DJ Dotz TPar System?
Thank you for reaching out to us. Unfortunately, the led rc2 remote will not work with the dotz tpar system. The correct controller for that system is called the dotz par rf controller. I will attach the link below. Let me know if you have any further questions. http://www.adj.com/dotz-par-rf
Is there a remote which will work with the ADJ Stinger? If so which one?
Thank you for reaching out to us. Unfortunately, the stinger does not have a hand held controler that will operate it. The only way you will be able to control this light is thru dmx. let me know if you have any further questions.