MCTRL-300

SKU: MCT300
Novastar Video Processor for AV6 Video Panel
Advantage Points: 830

Where to Buy

Enter your zip code below to find this product at a retailer near you!

Product Description

Details

The MCTRL-300 is a controller for ADJ's AV6 LED video panels. It features one DVI signal source input and two RJ45 pixel-data outputs.

The controller is easily configured via USB and it will drive up to 1.3 million pixels supporting the following resolutions: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668. 

The MCTRL-300 is an essential accessory for the AV6 video panels.

Specifications

Specifications

• Control Mode: Synchronous Display with Control PC by DVI

• Frame Update Frequency: 50-60Hz

• Scan Mode: 1/12 Duty 

• Refresh Rate: 1200Hz

• Support Input: Composite, S-Video, Component, VGA, DVI, 

  HDMI, HD_SDI

• Control Distance: Ethernet Cable <100m or Fiber Optic>120m

• Support VGA Mode: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668

• Brightness Correction: Pixel, Module, Cabinet

* Requires a computer (sold separately)

Videos

Videos

Downloads

Downloads

The following downloads are available for this product:

Title Description
M3 Nova User Manual for MCTRL-300 (MCT-300) Download
RCFG File For AV6 Serial Number Series 38571xxx Download
RCFG File For AV6 Serial Number Series 36573xxx Download
RCFG File For AV6 Serial Number Series 44558xxx Download
MCTRL-300 Configuration Software,V4.6.3, for AV3, AV4IP and AV6 Video Panels (WINDOWS ONLY) MCTRL-300 Configuration Software,V4.6.3, for AV3, AV4IP and AV6 Video Panels (WINDOWS ONLY) Download
RCFG File For AV6 Serial Number Series 05658xxx Download
RCFG File For AV6 Serial Number Series 15120xxx Download
RCFG File For AV6 Serial Number Series 14657xxx Download
RCFG File For AV6 Serial Number Series 26667xxx Download

FAQs

Frequently Asked Questions

Please see our frequently asked questions below. Please feel free to send us your questions by clicking here.

Hello, I'm planning on putting one of these walls in a club install I am doing. I am going to do a 6x3 split (3 x 2x3) rear wall hang and a 3x2 wall on the front of a DJ booth. 3 questions: -Am I able to split the CAT signal and have duplicate content on the two walls? -If I wanted to have the ability to do different content on the two walls, how would I do that? -Is there a way to do both? Thanks!

Hello Justin,

Thank you for reaching out to us. The nice thing about the mctrl processor is, that it has two ports. So one port can go to your 6x3 wall and the second port can go into your 3x2 wall. Yes, you will be able to play two diffrent content on each wall with our media mater software. Let me know if you have any further questions. My email is Petern@americandj.com Phone 323 213 4519

Thanks,

How do I download the software on a Mac

Hello Gisela,

Thank you for reaching out to us. If you look at our wesite it's stated that the software is compatible with Windows Only. On a MAC you would have to install windows for MAC. That would be the only way. Let me know if you have any further questions. Petern@americandj.com

Thanks, 

I was considering 12 panels for a show. Can the software configure them as 4 drops of 1 x 3 panels and can I define the space between?

Hello Jaime,

thank you for reaching out to us. Yes, the MCTRL 300 can configure the set up you are describing. Let me know if you have any further questions. Petern@americandj.com 

Thanks,