There are no FAQ's for UC3 Wireless
The UC3 Wireless Controller was designed to control multiple American DJ lighting fixtures that are UC3 compatible. Whether you're a DJ, Band, or Mobile Entertainer this controller will fit your needs. This easy to use controller can be setup with 1 master fixture on each output. From each output you may run an infinite number of slave units, that's a lot! It also features a convenient lock out function.
After holding the lock button for five seconds (hold again to turn off) the remote will lock allowing you to put it in your pocket and not have to worry about pressing any other buttons to interrupt your current setup. The UC3 has a range of 325 ft. or 100M so you can make changes from a distance. Switch between different modes with just the press of a button.
If you want to produce top level shows you need the UC3 Wireless Controller. Made with quality parts so you can expect top performance and longevity. We can't wait for you to take your shows to all new heights.
Please refer to the compatible model list to ensure compatibility.
- 4 Output Wireless UC3 controller
- 1 master fixture, from each output, can run an infinite number of slave units. Use 1/4" stereo cable to link between pack and master unit, and use DMX cable to link between fixtures.
- Includes wireless remote: Control Stand By (Black Out), Function and Mode for each output just like the single output UC3 controller
- 4x 1/4" output jacks to connect to master fixtures
- Lock out function
- Includes one 10-foot 1/4" stereo TRS cable
- Wireless Transmitting Distance: 325 ft. /100M
- Frequency: 433.9Mhz RF (Radio Frequency)
- Power: AC 120V/60Hz or 220V/50Hz (IEC socket) - not switchable voltage
- Dimensions (LxWxH): 10.25”x 4”x2” / 262x100x47mm
- Weight: 3 lbs. /1.3 kg
The following downloads are available for this product:
|UC3 Wireless User Manual Rev 4/2010||Download|
Frequently Asked Questions
Please see our frequently asked questions below. Please feel free to send us your questions by clicking here.