Pocket Scan Will Not Remember DMX Addressing
Make sure to have the pocket scan set to the REC Mode then type in the dmx address. To get the pocket scan in REC Mode, Press & Hold the 100 key and turn on the unit when you see REC in the display release the 100 key.
Pocket Scan not responding to a DMX controller.
Make sure you have the proper DMX address assigned for the controller being used. Check the controllers manual for the address.
Try a different DMX cable.
Cables tend to be the problem if you are sure the address is correct.
Try a different DMX controller.
Check that your polarity matches with the controller.
Pocket Scan Dispay shows code "RST"
The unit must be sent into the factory for reset of internal sensor.
My Pocket Scan is not responding to sound.
Turn off unit, press and hold the 100 Key..While holding down the 100 key turn the unit back on and release the the key when you see S-F or S-S. Make sure your volume sensitivity is set in the middle & play music.