How can i keep the spotlight to stop changing colors once i have it se to a specific color?
Set the unit to static mode. Call us at 800-322-6337 for a walk through.
Yesterday my colors were jumping all around on the platform. I wanted STEADY color....help!
Call us for a tutorial 800-322-6337.
How do I chain 4 so I can use them with the remote?
You will need to get three 3 pin dmx cables to get started. Next you will go dmx out from the first light to dmx in on the seond light and then dmx out from the second light to dmx in the third light an so on. After that set the “Slave” unit(s) to the DMX address setting.The “Slave” unit(s) will now follow the “Master”. Let me know if you have any further questions. My emial is Petern@americandj.com direct# 323-213-4519
We have successfully hooked up 3 fixtures (Mega Par Profile Plus) to our ADJ controller (RGBW4C) and can control all fixtures from the controller. But one of the fixtures always fades when we turn down the lights via the controller. The other two fixtures go off immediately. How to we get the fading light to stop fading and cut out immediately like the others. Thanks.
Dimmer Curve: This is used to set the dimming curve used with DMX mode. See page 25 for the dimming curves chart. 1. Plug the fixture in and press the MODE button until “DMX MODE” is displayed. 2. Press the SET UP button until “dr-X” is displayed. “X” represents the displayed dimmer curve (0-4). • 0 - Standard • 1 - Stage • 2 - TV • 3 - Architectural • 4 - Theatre 3. Press the UP or DOWN buttons to scroll through and select your desired dimming curve. Also make sure your light are in the 4CH mode. Let me know if this helps you out.
Can the Mega Par Profile Plus be used with the NE-1 controller that will be controlled/patched through the EXR WiFly Battery DMX transciever? If so, I've had problems connecting my current set up. I also would like a light show profile sent to me.
Yes, these products are compatible with one another. Please contact support @800-322-6337 ext 592 for proper troubleshooting and to request a profile.
Can I set these up to function with a RGB 3 controller?
This product is not compatible with the RGB3C. Please check out the RGBW4C.